Carburetor
- Built Exclusively For Circle Track Racing
- Extensively Reworked
- Increased Main Well Size
- Balanced To Assure High RPM Fuel Flow
- Several Circuit Modifications
- Metering Blocks Are Fully Modified
- Jet Power Valve/Accelerator Pump Are Calibrated
- Maximum Off The Corner Torque/Straight Away HP
- Modified To Control Fuel Slosh
- Assembled Using The Highest Quality Components
- All The Modifications Of Stage 1
- Fuel Metering Circuits Are Inspected
- Air Horn Is Milled To Improve/Equalize Air Flow
- Quick Change Cover Kit Is Optional
- All The Modifications Of A Stage 1 And 2
- Intended For Pro-Street Racing Applications
- Modified Venturis/Increased Air Flow
- Modified Discharge Boosters And Metering Blocks
- Increased Signal Strength And Fuel Atomization
- Machined Throttle Shafts
- Four Corner Idle Circuits/Modified Floats
- High Flow Needle And Seats
- Full Race Carb
- Air Horn Apparatus Completely Removed
- Center Section Is Hand Radiused To Achieve Max. Allowable Airflow
- Removable Air Bleeds Installed For Ultimate In Tuning Cab.
- Throttle Shafts Are Trimmed
- Ultimate Airflow From A Standard Flange Carburetor
- Metering Blocks Are Fully Blueprinted
- Balancing Main Well Volumes
- Optimizing The Emulsion System
- Idle Circuit Calibration
- Ultimate Fuel Curve And Fuel Atomization
- Comes w/Remote Electric Choke
- Best Performing Carburetor For Your Boat
- Remanufactured To Strictest Quality Standard
- Small Diameter Float For Maximum Float Bowl Volume
- Modified Based On Engine And Vehicle Specs
- Modified Idle/Transition/Accelerator Pump
- Using The Highest Quality Parts
- Carburetor Is Extensively Reworked
- Increased Main Well Size
- Balanced To Assure Top End High RPM Fuel Flow
- Several Circuit Modifications
- Keep Consistent Idle Quality
- Casting Plug Are Sealed With Epoxy
- All Circuits Are Checked For Proper Sizing
- Calibration Is Checked For Proper Jets
- Check Primary And Secondary Metering Rods
- Using The Highest Quality Parts
- New Float/Choke Pull-Off
- Bronze Bushed Throttle Shafts
- Restore Factory Stock Performance
- All The Features Of Stage 1
- Fully Recalibrated Idle/Off Idle/Main/Accel. Pump
- High Speed Circuits To Match Any Modifications
- Improved Idle Quality
- Instant Throttle Response
- Maximum Torque And Horsepower
- For Street-Strip/RVs/Tow Vehicles
- For Watercraft With Modified Engines
- Intended For Serious Street-Strip And Race Appl.
- Oversized .149 Needle And Seat Assembly
- Fully Modified Race Piece
- Main Well Size Is Increased
- Balanced To Assure Proper Top End
- High RPM Fuel Flow
- Extensive Circuit Modifications
- Instant Off The Line Response